how to charge noco boost plus gb40

Charlotte

3 min read

·

02-02-2025

11

0

Share

The Noco Genius Boost Plus GB40 is a powerful portable jump starter, but like any battery-powered device, it needs recharging. Knowing how to properly charge your GB40 is crucial for ensuring its longevity and readiness when you need it most. This guide will walk you through the process step-by-step.

Understanding Your Noco GB40 Charger

Before we dive into the charging process, let's clarify what you'll need:

• Your Noco Genius Boost Plus GB40: This is the star of the show!
• The included charging cable: Noco provides a specific cable for charging. Using a different cable might damage your device.
• A suitable power source: You can charge the GB40 using either a wall outlet (with the included AC adapter) or a 12V vehicle outlet (with the included car adapter).

How to Charge Your Noco GB40: A Step-by-Step Guide

Charging your Noco Boost Plus GB40 is straightforward. Here's how:

Method 1: Charging via Wall Outlet (AC Adapter)

1. Locate the charging port: Find the charging port on the side of your GB40. It's usually clearly marked.
2. Connect the AC adapter: Plug the smaller end of the included AC adapter into the GB40's charging port.
3. Plug in the adapter: Plug the larger end of the AC adapter into a standard wall outlet.
4. Monitor the charging indicator: The GB40 will typically have an LED indicator that shows the charging status. This might be a blinking light indicating charging or a solid light when fully charged. Refer to your GB40's manual for specific indicators.
5. Allow for complete charging: The charging time varies depending on the GB40's current charge level. Allow it to charge fully for optimal performance.

Method 2: Charging via Car Outlet (12V Adapter)

1. Locate the charging port: As with the AC method, find the charging port on your GB40.
2. Connect the 12V adapter: Plug the appropriate end of the included 12V adapter into the GB40's charging port.
3. Plug into your car's outlet: Insert the other end of the 12V adapter into your vehicle's 12V power outlet (cigarette lighter).
4. Monitor the charging indicator: Similar to the AC method, observe the LED indicator to track charging progress.
5. Ensure your car is running: The car needs to be running for sufficient power to charge the GB40.

Important Considerations:

• Charging time: The Noco GB40 typically takes several hours to fully charge from empty using either method. The exact time may vary slightly.
• Charging indicator: Pay close attention to the charging indicator lights. They'll provide feedback on the charging status. Consult your user manual for specific meanings.
• Overcharging: While rare, overcharging is possible. If you have a smart charger, it should automatically shut off once fully charged. If not, it is best to unplug it after several hours, and avoid leaving it plugged in indefinitely.
• Environmental conditions: Avoid charging the GB40 in extremely hot or cold environments. This can affect battery life and charging efficiency.
• Manual: Always refer to your GB40's user manual for specific instructions and safety precautions.

Troubleshooting Charging Issues

If you're experiencing problems charging your GB40, consider the following:

• Check the connections: Ensure both ends of the charging cable are securely connected to both the GB40 and the power source.
• Inspect the cable: Look for any damage to the charging cable. A damaged cable may prevent proper charging.
• Test the outlet: Verify that the wall outlet or car outlet is functioning correctly.
• Try a different outlet: If using a wall outlet, try a different one to rule out a faulty outlet.
• Contact Noco support: If you continue to experience problems, contact Noco's customer support for assistance.

By following these steps and paying attention to the charging indicator, you can keep your Noco Boost Plus GB40 fully charged and ready to jump-start your vehicle when needed. Remember to always consult your user manual for specific instructions and safety information.